AGi32 Outdoor Lighting Compliance

I have an outdoor parking lot with adjoining pedestrian walkways that must be verified against the relevant lighting-level standards. Using AGi32, you will import my site plan, position the luminaires I specify, set calculation grids over the parking bays and walkways, then run a full photometric simulation.

Your results need to show average, minimum, maximum illuminance and uniformity ratios for both the parking area and the paths. Highlight any points that fall below standard and include recommendations for aiming, wattage, or pole spacing tweaks if non-compliance appears.

Deliverables
• The native .agi32 file so I can review or adjust it later
• A clear PDF or image set of calculation summaries, false-colour plots and point-by-point values
• A short written note (or mark-ups on the plan) flagging any areas that need correction and your suggested changes

I will supply the CAD/PDF site layout, fixture IES files, mounting heights and target guideline. The task is complete when the report confirms whether the current design meets the standard—or, if not, when your recommended adjustments bring it into compliance.

I have attached a PDF that shows highlighted in RED what areas need to be simulated.