RPEQ - Seismic Restraint Certification (AS 1170.4) + QLD Form 15
Budget / SalaryA$250–500
TypeFreelance project
LocationRemote
Posted14 hours ago
RPEQ needed - seismic restraint certification (AS 1170.4) + QLD Form 15 for 2 small inline fans, Cairns QLD
We need a currently registered RPEQ (structural or mechanical) to assess an installed seismic restraint arrangement for compliance with AS 1170.4 and issue a QLD Form 15 acceptable to the building certifier (or Form 16 if the certifier requires it).
Scope (pump room, social housing project, Yorkeys Knob QLD):
- 2 x Fantech JetLine-250ECO inline fans (MUA-1, EAF-1), approx. 5.8 kg each
- Each fan on two 40x40 HDG Walraven cantilever brackets fixed to a fire-rated concrete block wall
- 4 x Friulsider X3 10x80 frame fixings (FMX3TH10080G) per fan, 50 mm embedment
- Fan cradle bolted to rails through waffle-pad isolation
- 300x300 rigid galv duct independently supported on cantilever brackets
Provided: site photos, as-constructed drawings incl. support details, fixing datasheet, fan data. If published anchor data is insufficient, please state what pull testing you need.
Deliverables: signed Form 15 + short supporting calc/letter.
Turnaround: 7 days from receiving info.
Please include your RPEQ number in your bid - bids without it won't be considered.
We need a currently registered RPEQ (structural or mechanical) to assess an installed seismic restraint arrangement for compliance with AS 1170.4 and issue a QLD Form 15 acceptable to the building certifier (or Form 16 if the certifier requires it).
Scope (pump room, social housing project, Yorkeys Knob QLD):
- 2 x Fantech JetLine-250ECO inline fans (MUA-1, EAF-1), approx. 5.8 kg each
- Each fan on two 40x40 HDG Walraven cantilever brackets fixed to a fire-rated concrete block wall
- 4 x Friulsider X3 10x80 frame fixings (FMX3TH10080G) per fan, 50 mm embedment
- Fan cradle bolted to rails through waffle-pad isolation
- 300x300 rigid galv duct independently supported on cantilever brackets
Provided: site photos, as-constructed drawings incl. support details, fixing datasheet, fan data. If published anchor data is insufficient, please state what pull testing you need.
Deliverables: signed Form 15 + short supporting calc/letter.
Turnaround: 7 days from receiving info.
Please include your RPEQ number in your bid - bids without it won't be considered.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.