Raspberry Pi Display Case Refinement
Budget / Salary€8–15
TypeFreelance project
LocationRemote
Posted6 hours ago
I already have an STL of a “Raspberry Pi Touch Display 2, 10.1″ Portrait” enclosure but it needs some tidy-up before I can send it to the printer. Here is what I want done:
• Strip away the existing logo and any embossed text so the exterior is clean.
• Verify the file opens at the correct 1:1 scale; if you notice any deviation, please adjust it.
• Inspect wall thicknesses and geometry for print-friendliness—no non-manifold edges, flipped normals, or impossible overhangs.
• Break the case into two printable halves (left and right), max size that can be printed is 200 mm x 200 mm. I’d like them to snap together with an interlocking, puzzle-style edge so they self-align without additional hardware. A robust snap-fit is preferred, but if you find a smarter interlock that still clicks securely, I’m open to it.
Please return cleaned, watertight STL (and STEP if convenient) for each half, ready for slicing. If you need anything from me, let me know.
NOTE: the file to modify is "obj_2_10Inch_TouchDisplay2_DesktopCase_Shell.obj.stl"
Other files (stand, etc.) are included so that you have the "full picture".
"Raspberry Pi Touch Display 2, 10.1″ Portrait" specifications: https://pip-assets.raspberrypi.com/categories/1083-raspberry-pi-touch-display-2/documents/RP-010276-MM-6-10_%20Touch%20Display%202%20product%20brief.pdf
• Strip away the existing logo and any embossed text so the exterior is clean.
• Verify the file opens at the correct 1:1 scale; if you notice any deviation, please adjust it.
• Inspect wall thicknesses and geometry for print-friendliness—no non-manifold edges, flipped normals, or impossible overhangs.
• Break the case into two printable halves (left and right), max size that can be printed is 200 mm x 200 mm. I’d like them to snap together with an interlocking, puzzle-style edge so they self-align without additional hardware. A robust snap-fit is preferred, but if you find a smarter interlock that still clicks securely, I’m open to it.
Please return cleaned, watertight STL (and STEP if convenient) for each half, ready for slicing. If you need anything from me, let me know.
NOTE: the file to modify is "obj_2_10Inch_TouchDisplay2_DesktopCase_Shell.obj.stl"
Other files (stand, etc.) are included so that you have the "full picture".
"Raspberry Pi Touch Display 2, 10.1″ Portrait" specifications: https://pip-assets.raspberrypi.com/categories/1083-raspberry-pi-touch-display-2/documents/RP-010276-MM-6-10_%20Touch%20Display%202%20product%20brief.pdf
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.