Kitbash Character Model from Illustration (Modular STL Parts)
Budget / SalaryHourly project
TypeFreelance project
LocationRemote
Posted21 minutes ago
Recreate the attached illustration (stylized female warrior: short brown bob, freckles, blue scarf, slate gray-blue tunic, tan leather belt and bracers, dark trousers, tall boots, longsword) as a kitbash miniature kit: every part is a separate, watertight STL that we assemble virtually in 3D software before printing.
Parts share one world position so any combination imports flush together — this is the first kit in a parts library where torsos, boots, belts, weapons, etc. swap freely across future characters.
Kitbash Spec (mandatory)
- All parts modeled in place on a shared armature: every file imported at origin (0,0,0) aligns into the full figure with zero adjustment.
- Seam edges (neck, shoulders, wrists, hips, ankles, waist) must have matching contours — flush, no gaps or steps, with ~0.2–0.3 mm overlap so the digitally assembled figure prints solid.
- Standard seam layout will be reused across all future kits — treat it as spec, not preference.
- Demonstrate at least one swap at delivery (e.g., barefoot or alternate hand variant).
Technical
- 32mm heroic scale (feet-to-eye ~35 mm).
- Watertight, manifold, walls ≥ 0.5 mm, no non-uniform scaling.
- Source: Blender (.blend) preferred, each part a separate named object.
- Naming: model_[part]_[L|R].stl.
Milestones
- Paid test — $10: Model 2–3 parts of our choosing (e.g., one boot, the belt, one hand). Verifies understanding of in-place alignment and seam spec before full commitment. Paid immediately on acceptance.
- 25% — Blockout: Low-detail parts cut at all standard seams, shared world position. Approval gate before detailing.
- 40% — Full sculpt: All parts per illustration; delivery includes assembly renders (front/back/side) proving flush alignment + one part-swap render.
- 20% — Print prep: Pre-supported files, FDM notes, one test-print revision round.
- 15% — Final: All STL/3MF, source file, full-figure STL, one-page exploded assembly PDF.
How to Apply (read carefully)
Briefly answer:
- How you keep multiple part files aligned to a shared world position across separate exports.
- One shipped kitbash/multi-part miniature project (link to pictures or files).
- Estimated hours and hourly rate.
- I won't read people applying with AI. Do not lost your time and mine.
Terms
- Hand-sculpted only. AI-generated meshes (Meshy, Rodin, image-to-3D, etc.) = immediate termination without payment. We check.
- No asset-store bases or recycled kits.
- Full commercial rights to all files, derivatives, and the seam spec.
- One revision round per milestone; scope changes quoted separately.
Parts share one world position so any combination imports flush together — this is the first kit in a parts library where torsos, boots, belts, weapons, etc. swap freely across future characters.
Kitbash Spec (mandatory)
- All parts modeled in place on a shared armature: every file imported at origin (0,0,0) aligns into the full figure with zero adjustment.
- Seam edges (neck, shoulders, wrists, hips, ankles, waist) must have matching contours — flush, no gaps or steps, with ~0.2–0.3 mm overlap so the digitally assembled figure prints solid.
- Standard seam layout will be reused across all future kits — treat it as spec, not preference.
- Demonstrate at least one swap at delivery (e.g., barefoot or alternate hand variant).
Technical
- 32mm heroic scale (feet-to-eye ~35 mm).
- Watertight, manifold, walls ≥ 0.5 mm, no non-uniform scaling.
- Source: Blender (.blend) preferred, each part a separate named object.
- Naming: model_[part]_[L|R].stl.
Milestones
- Paid test — $10: Model 2–3 parts of our choosing (e.g., one boot, the belt, one hand). Verifies understanding of in-place alignment and seam spec before full commitment. Paid immediately on acceptance.
- 25% — Blockout: Low-detail parts cut at all standard seams, shared world position. Approval gate before detailing.
- 40% — Full sculpt: All parts per illustration; delivery includes assembly renders (front/back/side) proving flush alignment + one part-swap render.
- 20% — Print prep: Pre-supported files, FDM notes, one test-print revision round.
- 15% — Final: All STL/3MF, source file, full-figure STL, one-page exploded assembly PDF.
How to Apply (read carefully)
Briefly answer:
- How you keep multiple part files aligned to a shared world position across separate exports.
- One shipped kitbash/multi-part miniature project (link to pictures or files).
- Estimated hours and hourly rate.
- I won't read people applying with AI. Do not lost your time and mine.
Terms
- Hand-sculpted only. AI-generated meshes (Meshy, Rodin, image-to-3D, etc.) = immediate termination without payment. We check.
- No asset-store bases or recycled kits.
- Full commercial rights to all files, derivatives, and the seam spec.
- One revision round per milestone; scope changes quoted separately.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.