High-Detail FDM 3D CAD Model - Bambu Lab 3D Printing Model
Budget / SalaryA$250–400
TypeFreelance project
LocationRemote
Posted1 hour ago
I need a custom rugby-player table-number trophy designed specifically for FDM 3D printing.
The finished trophy will be approximately 270mm tall and used commercially in our café. Customers are handed the trophy when ordering and take it to their table, so it needs to be strong, stable, easy to carry and resistant to being dropped.
DESIGN
• Male rugby player carrying a rugby ball
• Player integrated with the trophy structure for strength
• Large, highly visible table number at the top
• Stable weighted-style base
• Overall height approximately 270mm
• Designed to minimise fragile arms, legs, fingers and other failure points
Front message:
YOU'RE NOW PART OF OUR TEAM
Rear message:
You'll never understand the power of a community until you're a part of one.
COLOURS
The trophy will be printed on a Bambu Lab P2S with AMS.
I currently use:
• Black – main trophy/player
• White – table number
• Red – accent
• Green – accent
The model should therefore be designed with separate colour bodies/parts where appropriate so they can be easily assigned in Bambu Studio.
The number is NOT removable. Each trophy will have its own permanently modelled number.
The first prototype should be *12.
Once the design has been successfully test printed, I will require versions numbered 1–30.
IMPORTANT – FDM DESIGN
This is not just a rendering project.
The final model must be engineered for FDM printing with practical:
• wall thicknesses
• overhangs
• support requirements
• layer orientation
• structural strength
• manifold/watertight geometry
I want to avoid excessive supports and post-processing wherever practical.
DELIVERABLES – PROTOTYPE
• Native editable CAD/source file
• STEP file
• STL ready for slicing
• 3MF suitable for Bambu Studio, ideally retaining separate colour bodies
• Table 12 prototype
• One revision after my physical test print
The table number must be straightforward to change in the source model so Tables 1–30 can subsequently be produced.
I will test-print the prototype on my P2S before approving the final design.
Please provide examples of character/sculptural work designed specifically for FDM printing, your preferred modelling software, estimated turnaround time and fixed price.
Full commercial rights and editable source files are required on completion.
The finished trophy will be approximately 270mm tall and used commercially in our café. Customers are handed the trophy when ordering and take it to their table, so it needs to be strong, stable, easy to carry and resistant to being dropped.
DESIGN
• Male rugby player carrying a rugby ball
• Player integrated with the trophy structure for strength
• Large, highly visible table number at the top
• Stable weighted-style base
• Overall height approximately 270mm
• Designed to minimise fragile arms, legs, fingers and other failure points
Front message:
YOU'RE NOW PART OF OUR TEAM
Rear message:
You'll never understand the power of a community until you're a part of one.
COLOURS
The trophy will be printed on a Bambu Lab P2S with AMS.
I currently use:
• Black – main trophy/player
• White – table number
• Red – accent
• Green – accent
The model should therefore be designed with separate colour bodies/parts where appropriate so they can be easily assigned in Bambu Studio.
The number is NOT removable. Each trophy will have its own permanently modelled number.
The first prototype should be *12.
Once the design has been successfully test printed, I will require versions numbered 1–30.
IMPORTANT – FDM DESIGN
This is not just a rendering project.
The final model must be engineered for FDM printing with practical:
• wall thicknesses
• overhangs
• support requirements
• layer orientation
• structural strength
• manifold/watertight geometry
I want to avoid excessive supports and post-processing wherever practical.
DELIVERABLES – PROTOTYPE
• Native editable CAD/source file
• STEP file
• STL ready for slicing
• 3MF suitable for Bambu Studio, ideally retaining separate colour bodies
• Table 12 prototype
• One revision after my physical test print
The table number must be straightforward to change in the source model so Tables 1–30 can subsequently be produced.
I will test-print the prototype on my P2S before approving the final design.
Please provide examples of character/sculptural work designed specifically for FDM printing, your preferred modelling software, estimated turnaround time and fixed price.
Full commercial rights and editable source files are required on completion.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.