Hardware/PCB Engineer Needed – ESP32 Startup & W5500 Ethernet Reliability (EasyEDA Pro)

via Freelancer ·

Budget / Salary$10–30
TypeFreelance project
LocationRemote
Posted1 hour ago
I have designed and manufactured a custom PCB using an ESP32-WROOM-32 and W5500 Ethernet module in EasyEDA Pro. The PCB works, but I am experiencing intermittent hardware reliability issues.

Power configuration:
12 V DC power supply through a long cable.
12 V to 5 V DC-DC converter external (5 V / 3 A). (alibaba)
AMS1117-3.3 regulator on pcb supplies the ESP32 and W5500.

W5500 power controlled by a transistor/MOSFET circuit using ESP32 GPIO5, allowing the ESP32 to power-cycle the Ethernet module if it becomes unresponsive.

W5500 CS connected to ESP32 GPIO0.

Current problems:

Sometimes the ESP32/w5500 fails to boot when power is first applied. I need to switch the 12 V supply OFF/ON several times before it starts.

Sometimes the W5500 becomes unreachable even though its Ethernet LEDs are ON.

I cannot determine whether the issue is related to power stability, ESP32 boot pins, W5500 initialization, or w5500.

What I need:
An experienced hardware/PCB engineer to review and improve my existing EasyEDA Pro project, particularly:
ESP32 EN/reset and GPIO strapping pins.
W5500 Ethernet connections and power-switching circuit.
Capacitors, resistors, transistor/MOSFET selection, and PCB layout.

Important: This is primarily a hardware design and troubleshooting project, not a firmware development project.

The PCB is as industrial and must operate 24/7 unattended. The devices are installed remotely, so manually restarting them is not practical.

I need a reliable design that starts correctly every time, withstands power interruptions, and supports automatic recovery if the Ethernet module fails.

Deliverables: Identify the likely hardware root causes, recommend specific component/circuit changes, and update the existing EasyEDA Pro schematic and PCB layout.

I can provide the complete EasyEDA Pro project, schematic, PCB files, firmware, and test measurements.

before making offer tell me what u think problem is so based on this i can choose u coz now lot of people use chatgpt and i dont trust if u dont suggest first what u think is problem and what will u change
electronics microcontroller pcb layout circuit design embedded systems
Apply on Freelancer →

Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.