3-Phase Motor Auto Switch Design
Budget / Salary₹12,500–37,500
TypeFreelance project
LocationRemote
Posted1 hour ago
Project Title: Hardware & Firmware Design for 3-Phase Submersible Motor Auto Switch (Low-Cost MCU)
Project Scope:
Looking for an experienced Embedded Hardware & Firmware Engineer to design a low-cost, mass-manufacturable 3-Phase Auto Switch with Single Phasing Protection (SPP).
Technical Specifications:
Input: 415V AC, 3-Phase (50 Hz). Transformerless capacitive dropper power supply (12V for relay, 5V for MCU).
Sensing: Phase sequence/unbalance and single-phase failure detection via optocoupler or resistor network.
MCU: Ultra-low-cost 8-pin or 14-pin MCU (e.g., Padauk, Nuvoton N76E003, or Puya/STC).
Output: 1x 12V Cube Relay (SPDT) to actuate motor starter + 3 status LEDs (Timer, SPP, OK).
Firmware Logic: 30–45 sec power-on delay timer; trip relay within 2–3 sec if any single phase is missing.
Form Factor: Compact single-layer or 2-layer PCB designed to fit standard small ABS enclosure.
Mandatory Deliverables:
Complete Schematic & PCB Layout files in KiCad / EasyEDA.
Production-ready Gerber files.
Detailed Bill of Materials (BOM) with manufacturer part numbers (MPN) and sourcing links.
Well-commented Embedded C source code (.c, .h) and compiled .hex file.
100% IP rights and source code transfer to the client.
Budget: (₹15000 – ₹18000)
Project Scope:
Looking for an experienced Embedded Hardware & Firmware Engineer to design a low-cost, mass-manufacturable 3-Phase Auto Switch with Single Phasing Protection (SPP).
Technical Specifications:
Input: 415V AC, 3-Phase (50 Hz). Transformerless capacitive dropper power supply (12V for relay, 5V for MCU).
Sensing: Phase sequence/unbalance and single-phase failure detection via optocoupler or resistor network.
MCU: Ultra-low-cost 8-pin or 14-pin MCU (e.g., Padauk, Nuvoton N76E003, or Puya/STC).
Output: 1x 12V Cube Relay (SPDT) to actuate motor starter + 3 status LEDs (Timer, SPP, OK).
Firmware Logic: 30–45 sec power-on delay timer; trip relay within 2–3 sec if any single phase is missing.
Form Factor: Compact single-layer or 2-layer PCB designed to fit standard small ABS enclosure.
Mandatory Deliverables:
Complete Schematic & PCB Layout files in KiCad / EasyEDA.
Production-ready Gerber files.
Detailed Bill of Materials (BOM) with manufacturer part numbers (MPN) and sourcing links.
Well-commented Embedded C source code (.c, .h) and compiled .hex file.
100% IP rights and source code transfer to the client.
Budget: (₹15000 – ₹18000)
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.